How to Clean Your Hot Tub & Maintain Crystal-Clear Water

How to Clean Your Hot Tub & Maintain Crystal-Clear Water ๐Ÿ›๐Ÿ’ฆ

Keeping your hot tub clean ensures safe, bacteria-free water, extends the lifespan of your tub, and enhances your soaking experience. Whether you use your tub daily or occasionally, proper maintenance is key.


1๏ธโƒฃ Daily/After-Use Maintenance ๐Ÿงผ

โœ” Check Water Clarity โ€“ Look for cloudiness, foam, or discoloration.
โœ” Run the Jets for Circulation โ€“ This keeps water moving and evenly distributes chemicals.
โœ” Wipe Down Waterline โ€“ Prevents biofilm and scum buildup.


2๏ธโƒฃ Weekly Maintenance Routine ๐Ÿ“…

๐Ÿ”น Test Water Chemistry

  • pH: 7.2 โ€“ 7.8
  • Alkalinity: 80 โ€“ 120 ppm
  • Chlorine/Bromine: 3 โ€“ 5 ppm
  • Calcium Hardness: 150 โ€“ 250 ppm (prevents scale buildup)

๐Ÿ”น Shock the Water (Oxidizer Treatment)

  • Use non-chlorine shock (MPS) for frequent users.
  • Use chlorine shock if the tub has a strong odor or cloudiness.

๐Ÿ”น Rinse the Filters

  • Remove and rinse filters with a hose to remove debris.

๐Ÿ”น Wipe Down Shell & Cover

  • Use a vinegar-water mix or hot tub cleaner to prevent mold.

3๏ธโƒฃ Monthly Maintenance ๐Ÿ—“๏ธ

โœ” Deep Clean the Filter

  • Soak in a filter cleaner solution overnight to remove oils and dirt.
  • Rinse thoroughly before reinstalling.

โœ” Check Water Level

  • Add water if low, keeping it at the appropriate fill line.

4๏ธโƒฃ Every 3-4 Months: Full Drain & Deep Clean ๐Ÿ†

๐Ÿ”น Turn Off & Drain

  • Use a pump or let the tub drain naturally.

๐Ÿ”น Clean the Shell

  • Use a hot tub cleaner or diluted vinegar solution to wipe down the interior.

๐Ÿ”น Flush the Plumbing (Every 6 Months)

  • Use a hot tub line flush product to remove hidden biofilm and bacteria inside pipes.

๐Ÿ”น Refill & Balance Water

  • Refill with clean water and test & adjust chemicals.

5๏ธโƒฃ Bonus: How to Prevent Common Issues ๐ŸšซโŒ

โŒ Cloudy Water? โ€“ Check pH, shock the tub, and clean filters.
โŒ Foamy Water? โ€“ Rinse off lotions & oils before entering. Use an anti-foam treatment.
โŒ Strong Chlorine/Bromine Smell? โ€“ This means too many chloramines (used-up sanitizer). Shock the tub!
โŒ Algae or Green Water? โ€“ Increase sanitizer, shock the tub, and scrub surfaces.


6๏ธโƒฃ Advanced Upgrades for Easier Cleaning ๐Ÿ”ฅ

๐Ÿš€ Ozone Generator โ€“ Reduces chemical usage and kills bacteria naturally.
๐Ÿš€ Saltwater System โ€“ Less maintenance, gentler on skin, and self-regulates chlorine levels.
๐Ÿš€ UV-C Sanitizer โ€“ Uses ultraviolet light to eliminate pathogens.
๐Ÿš€ Automated Water Testing & Dosing โ€“ Smart sensors keep water balanced 24/7.


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.